Cleaners

  • Electroposit PC

    ELECTROPOSIT™ PC CLEANER is an acidic soak cleaner that is used to clean the copper surfaces of printed circuit boards prior to pattern plating, activating the surfaces as it cleans.

  • Ronaclean EVP 209

    RONACLEAN EVP-209 Acid Cleaner is specially designed for removing residues left after developing aqueous, alkali strippable dry films

  • Ronaclean PC 960

    RONACLEAN™ PC 960 is an acid cleaner specifically developed to remove oxidation from copper surfaces after photomech and is effective for all fully-aqueous dry-film systems.

You can only view the above documents if you are logged in.

DC Horizontal

  • Copper Gleam HGX
  • Copper Gleam HS200

    COPPER GLEAM™ HS-200 is a full bright acid copper plating process specifically formulated for use in conveyorized plating equipment with insoluble anode. Formulated for high current density plating, the process is capable of producing uniform, bright deposits of high ductility and tensile strength in accelerated plating times.

  • Copper Gleam SBH

    COPPER GLEAM™ SB-H is a process specifically designed for printed circuit applications in which smooth satin copper deposits are required and high-speed equipment is used, and is particularly designed for use with insoluble anode systems.

You can only view the above documents if you are logged in.

DC Vertical

  • Copper Gleam HT55
  • Copper Gleam ST 920 Acid Copper

    COPPER GLEAM™ ST-920 Acid Copper is specifically formulated for use with copper anodes and direct current (DC) rectification. The product offers excellent through-hole throwing power combined with excellent conformal microvia plating. Formulated to operate over a broad range of operating conditions, the bath offers end users with excellent production flexibility in either panel or pattern plate operation.

  • Electroposit 1000

    ELECTROPOSIT™ 1000 ACID COPPER is designed for reliable through-hole plating of thick multi-layer printed circuit boards with hole aspect ratios up to 15:1 and beyond.

  • Electroposit 1300

    ELECTROPOSIT™ 1300 ACID COPPER is a single-component additive system that combines the functions of brightener and leveler, and is designed for reliable through-hole plating of multi-layer and double-sided printed circuit boards of conventional/medium aspect ratio.

  • Electroposit 1400 Acid Copper

    The ELECTROPOSITTM 1400 Acid Copper Plating Additive System is designed for reliable through-hole plating of printed circuit boards. Use of the Additive System can potentially increase productivity, while offering deposits with excellent leveling, surface distribution and throwing power. The ELECTROPOSIT 1400 Acid Copper System is designed to be used to plate boards with thicknesses up to approximately 5 mm at high rates with excellent surface distribution, leveling and throwing power. Depending on the board plating difficulty, the plating conditions can be adjusted to offer optimum performance.

You can only view the above documents if you are logged in.

Through Hole Fill

  • Microfill THF

    MICROFILLTM THF Electrolytic Copper is designed to offer outstanding through-hole fill particularly for substrates intended for use as core layers in sequential build-up SBU) applications. The bath is designed for use with insoluble anodes and direct current (DC) rectification. Formulated to operate over a broad range of operating conditions, the bath offers end-users outstanding production flexibility in either panel or pattern plate operating modes.

You can only view the above documents if you are logged in.

Tin and Tin/Lead

  • Ronastan EC-1

    RONASTAN™ EC-1 is an acidic tin plating solution which produces smooth, fine-grained deposits over a wide plating range, and the deposits can be used as an etch resist in the manufacturing of printed circuit boards.

  • Solderon PC

    SOLDERON™ PC is a tin-lead alloy process specifically designed to produce uniform matte coatings of 60/40 tin-lead alloys from an organic sulfonate electrolyte for printed circuit applications.

  • Solderon PCT

    SOLDERON™ PC-T is a tin process for producing fine-grain matte tin electrodeposits from a non-fluoborate electrolyte, especially in metallic etch resist applications in the printed circuit industry.

You can only view the above documents if you are logged in.

Viafill

  • Microfill EVF

    MICROFILL™ EVF COPPER VIA FILL is specifically formulated for use with insoluble anodes and direct current (DC) operation, providing enhanced via filling performance with simultaneous through-hole plating. This product can be tuned for both HDI and IC substrate applications, offering superior production flexibility

  • Microfill LVF3 Acid Copper

    MICROFILL™ LVF 3 Acid Copper is designed to offer exceptional blind microvia filling performance, and is specifically formulated for use with insoluble anodes and direct current (DC) rectification. Formulated to operate over a broad range of operating conditions, the bath offers end users with outstanding production flexibility in either panel or pattern plate operation.

You can only view the above documents if you are logged in.