Duraposit MF-1110 is an autocatalytic electroless nickel process with follow characteristics: 1. free of lead 2. free of cadmium 3. free of ammonium 4. phosphorus concentration 10.5 – 12% 5. self-regulating process 6. high protection from corrosion (passes nitric acid test) 7. initial pH is automatically set up by preparation of the new solution 8. one part make up
Niposit LT is a low temperature electroless nickel process, specially designed for "plating-onplastics" applications. Niposit LT fulfils all requirements for plating on aluminium. (First layer after zincate treatment ,see “General”, point 4 for reference) The deposits are bright to semi-bright and its phosphorous content varies between 4 and 6 % P,depending on the bath parameters.
Niposit PM 980
Niposit PM 980 is specifically formulated to auto-catalytically deposit nickel - phosphorus (4 – 5%) alloys from an alkaline solution. Niposit PM 980 will deposit an adherent coating on properly - prepared plastic substrates that serves as a base for subsequent electrolytic plating. The resulting nickel - phosphorus deposit will exhibit excellent bond strength, with a finish reproducing that of the base material. Niposit PM 980 deposits are capable of withstanding relatively high electroplating current densities without “burn off”. Characteristics: 1. Extremely long solution life 2. Self pH regulating. 3. Exceptional chemical stability. 4. Low temperature process. 5. High tolerance to metallic contamination. 6. Fine grain, pit free deposits.
Niposit PM 988
Niposit PM-988 heralds the dawn of a new era in metallization for “plating-on-plastics” applications. The Niposit PM-988 process is designed to auto - catalytically deposit nickel - phosphorus (4 - 7 %) alloys from a non-ammoniacal alkaline solution. Niposit PM-988 will deposit an adherent coating on suitably prepared plastic substrates that serve as a base for subsequent electrolytic plating. The resulting nickel - phosphorus deposit will exhibit excellent bond strength, with a surface finish reproducing that of the base material. Niposit PM-988 deposits are capable of withstanding relatively high electroplating current densities with no risk of “burn off”. Key characteristics: 1. FREE from Ammonia. 2. Contains NO lead or cadmium. 3. Free from chloride 4. Low operating temperature. 5. Extremely long solution life. 6. Exceptional chemical stability. 7. High tolerance to metallic contamination. 8. Fine grain, pit free deposits.
Ronamax SR is an ammonia-free, electroless nickel process, producing bright to semi-bright, highly corrosion-resistant deposits. The phosphorous content, depending on the bath parameters, varies between 10.5 - 14 %. The self-regulation pH adjustment ensures a constant deposition rate particularly with higher deposit thicknesses. Ronamax SR is an extremely stable and straightforward process to operate.
Duraposit MF-0820 is a lead free, cadmium free mildly acidic electroless nickel/phosphorus process, specifically formulated to produce bright and corrosion resistant deposits with a phosphorus content of 7 - 10 % depending on bath parameters. Advantages: 1. Lead and cadmium free deposits 2. Bright deposits 3. Extremely long bath life (over 7 metal turnovers) 4. Stable deposition rate (up to 25 microns/hr) 5. Corrosion resistant, nickel phosphorus deposits 6. Easy to control 7. Self regulating process 8. Only 1 part make up
Niposit 65 Electroless Nickel is a stable, ammoniacal, self-adjusting pH electroless nickel plating bath, which is designed to produce deposits of medium phosphorus content and consequently deposits with excellent hardness and wear resistance. Niposit 65 Electroless Nickel deposits are bright and slightly magnetic and with suitable pretreatment, pore free deposits can be plated onto copper, copper alloys, ferrous based materials, nickel alloys, beryllium, titanium, aluminium and aluminium alloys.
Ronamax NPA 8009
The Ronamax NPA-8009 is specifically formulated to deposit semi-bright nickel, 8 - 10 % phosphorous alloys autocatalytically from a mildly acidic solution. The process can be used in both rack and barrel applications to produce functional coatings on a wide range of metallic and non-metallic substrates.
NIPOSIT™ 468 is a stable, easy to operate, electroless nickel boron plating bath suitable for plating a complete range of substrate materials.
Mildly acidic electroless nickel/phosphorus process producing bright, corrosion resistant deposits. Ronamax SMT is intended for use as part of the Ronamerse SMT system for coating printed circuit boards, especially those designed for surface mount applications. The combination of Ronamax SMT and Aurolectroless SMT has excellent solderability, which is maintained during prolonged storage. Ronamax SMT produces deposits of uniform thickness at a consistent deposition rate throughout the life of the solution.