UV Dielectric & Encapsulant Inks
Offering an ideal solution for high strength, toughness, flexibility and natural moisture resistance, the range of UV curable dielectric and encapsulant inks that are on offer are suitable for a wide application range, compatible with the conductive inks within the product portfolio and presenting outstanding adhesion to polymer films and copper as well as a multitude offer substrates.
You can only view the below documents if you are logged in, so login or register today.
-
UV-1006S
Cured films of UV-1006S exhibit excellent adhesion to glass, metal, indium tin oxide (ITO), polyester, and most other plastic substrates
Exceptional moisture resistance
Maintains its electrical integrity over a wide temperature and frequency range, making it suitable for high temperature applications, and will withstand continuous exposure up to 155oC. Cured films will withstand extreme thermal shock from +200oC to well below –60oC. The high temperature resistance of UV-1006S allows it to be used in wave soldering applications.
Excellent pot life and UV cure mechanism allow for heating of the material to precisely control viscosity for consistent application weights.
Excellent as a protective barrier on silver ink bus bars, and will not fracture off of ITO substrates when die cut or sheared
Available in clear or green color
Compatible with all of our silver conductive inks, carbon resistive inks, silver conductive epoxy adhesives, UV curable encapsulants and conformal coatings
-
UV-2530
Screen printable matte dielectric
High strength, toughness, outstanding flexibility, inherent moisture resistance, and low odour make this material an excellent candidate for screen printed dielectric layers in membrane switch crossover and tail coat applications.
Cured UV-2530 will withstand extreme thermal shock cycling, from +150°C to well below -50°C, and maintains its electrical integrity over a wide temperature and frequency range.
Can be cured with UV light in seconds, allowing for high-speed Production
Compatible with our silver filled conductive inks, carbon resistive screen printable inks, silver conductive epoxies and UV curable encapsulants and conformal coatings
Available in clear translucent, blue, green or black colours
-
UV-2531
100% solids, UV curable, screen printable glossy material that can be cured with UV light in seconds, allowing for high-speed production
High strength, toughness, outstanding flexibility, inherent moisture resistance, and low odour make this material an excellent candidate for screen printed dielectric layers in membrane switch crossover and tail coat applications
Cured UV-2531 will withstand extreme thermal shock cycling, from +150°C to well below -50°C, and maintains its electrical integrity over a wide temperature and frequency range.
Available in transparent clear, blue or green colours
Compatible with our silver-filled conductive inks, carbon resistive screen printable inks and silver conductive epoxies
-
UV-3010
Insulation resistance of cured films of UV-3010 at 100°C and 95% relative humidity is one of the highest and most stable of any coating in the marketplace, including epoxy, silicone and urethane
Cured film of UV-3010 will withstand extreme thermal shock and thermal cycling from +150°C to -60°C, while maintaining its electrical integrity over a wide temperature and frequency range
UV-3010 meets UL 94V-0 flammability requirements, as well as the specifications of MIL 46058-C for printed circuit boards.
UV cure is accomplished within seconds, allowing for high-speed production.
Rheology of UV-3010 makes it suitable for syringe dispensing. UV-3010 can also be heated to drop its viscosity for dipping applications.
High temperature resistance of UV-3010 allows it to be used in wave soldering applications
100% solids
