UV Dielectric & Encapsulant Inks

Offering an ideal solution for high strength, toughness, flexibility and natural moisture resistance, the range of UV curable dielectric and encapsulant inks that are on offer are suitable for a wide application range, compatible with the conductive inks within the product portfolio and presenting outstanding adhesion to polymer films and copper as well as a multitude offer substrates.

You can only view the below documents if you are logged in, so login or register today.

  • UV-2530

    Screen printable matte dielectric

    High strength, toughness, outstanding flexibility, inherent moisture resistance, and low odour make this material an excellent candidate for screen printed dielectric layers in membrane switch crossover and tail coat applications.

    Cured UV-2530 will withstand extreme thermal shock cycling, from +150°C to well below -50°C, and maintains its electrical integrity over a wide temperature and frequency range.

    Can be cured with UV light in seconds, allowing for high-speed Production

    Compatible with our silver filled conductive inks, carbon resistive screen printable inks, silver conductive epoxies and UV curable encapsulants and conformal coatings

    Available in clear translucent, blue, green or black colours

  • UV-2531

    100% solids, UV curable, screen printable glossy material that can be cured with UV light in seconds, allowing for high-speed production

    High strength, toughness, outstanding flexibility, inherent moisture resistance, and low odour make this material an excellent candidate for screen printed dielectric layers in membrane switch crossover and tail coat applications

    Cured UV-2531 will withstand extreme thermal shock cycling, from +150°C to well below -50°C, and maintains its electrical integrity over a wide temperature and frequency range.

    Available in transparent clear, blue or green colours

    Compatible with our silver-filled conductive inks, carbon resistive screen printable inks and silver conductive epoxies

  • UV-3010

    Insulation resistance of cured films of UV-3010 at 100°C and 95% relative humidity is one of the highest and most stable of any coating in the marketplace, including epoxy, silicone and urethane

    Cured film of UV-3010 will withstand extreme thermal shock and thermal cycling from +150°C to -60°C, while maintaining its electrical integrity over a wide temperature and frequency range

    UV-3010 meets UL 94V-0 flammability requirements, as well as the specifications of MIL 46058-C for printed circuit boards.

    UV cure is accomplished within seconds, allowing for high-speed production.

    Rheology of UV-3010 makes it suitable for syringe dispensing. UV-3010 can also be heated to drop its viscosity for dipping applications.

    High temperature resistance of UV-3010 allows it to be used in wave soldering applications

    100% solids

  • bt-101-barium-titanate-dielectric.pdf

    Printed EL panel capacitance layer between phosphor & back electrodes

You can only view the above documents if you are logged in.