Alfisatin 357 is an E6 long-term pickling additive especially developed for the high requirements of the aluminium market. Surface irregularities due to special alloy compositions are safely and permanently prevented. Apart from the strong foam-reducing properties and a clearly better draining and rinsing
behaviour, Alfisatin 357 makes possible a fine mat and homogenous
pickling finish on various special alloys.
Alfisatin 357 is ideally operated from an aluminium content of approx. 140
g/l onwards. Due to the optimised draining properties, higher aluminium
contents can be maintained in the bath so that a stronger satin finish of the
surface is possible. Due to the special formulation, an improved
conservation for storage of long-term pickling baths is achieved as they
must be stored for wastewater treatment.
Due to its design, Alfisatin 357 is distinguished by good visual levelling with
minor abrasion even on sensitive surfaces. Shadows caused by wires,
stains resulting from the transport between the procedures, stone or sludge
will not occur if the bath is operated correctly.
Product Features:
Alfisatin 357 is an E6 long-term pickling additive especially developed for the high requirements of the aluminium market. Surface irregularities due to special alloy compositions are safely and permanently prevented. Apart from the strong foam-reducing properties and a clearly better draining and rinsing
behaviour, Alfisatin 357 makes possible a fine mat and homogenous
pickling finish on various special alloys.
Alfisatin 357 is ideally operated from an aluminium content of approx. 140
g/l onwards. Due to the optimised draining properties, higher aluminium
contents can be maintained in the bath so that a stronger satin finish of the
surface is possible. Due to the special formulation, an improved
conservation for storage of long-term pickling baths is achieved as they
must be stored for wastewater treatment.
Due to its design, Alfisatin 357 is distinguished by good visual levelling with
minor abrasion even on sensitive surfaces. Shadows caused by wires,
stains resulting from the transport between the procedures, stone or sludge
will not occur if the bath is operated correctly.
Manufacturers:
