XV1300 Series inks are high definition screen printing legend inks suitable for use over UV solder resists and many types of base laminate material. They are designed to give rapid cure when exposed to ultraviolet radiation.
This Technical Information Leaflet (TIL) and the relevant Material Safety Data Sheet (MSDS) should be read carefully prior to using this product.

Product features
• RoHS & WEEE Directive Compliant
• XV1300 legend inks will withstand most soldering and flux cleaning operations
• XV1300 inks are available in white, yellow, and black

XZ80 Series Notation Inks

These single pack, ready to use, thermal curing legend inks have a wide range of applications and have been specifically developed to display a variety of important properties. These include excellent printability, good adhesion, hardness, resistance to scuffing, heat resistance and resistance to the many types of solvents that flood the board during processing.
This Technical Information Leaflet (TIL) and the relevant Material Safety Data Sheet (MSDS) should be read carefully prior to using this product.

Product features
• RoHS & WEEE Directive Compliant
• Suitable for use on the soldered side of boards
• Resist all common flux removal systems using alcohols or halogenated hydrocarbons
• Single pack thermal curing board marking/legend inks are available in the following colours:
• XZ81 White
• XZ83 Yellow
• XZ85 Non-conducting Black

Imagecure XV501T-4 Screen is a two-component thermal hardening liquid photoimageable solder resist that dries by solvent evaporation to give a film that can be processed in aqueous potassium or sodium carbonate solution, or Butyl diglycol (BDG).
This Technical Information Leaflet (TIL) and the relevant Material Safety Data Sheet (MSDS) should be read carefully prior to using this product.
Imagecure XV501T-4 screen products are not recommended for use with reflow tin/lead and electrolytic gold plated conductors. Imagecure XV501T screen products are recommended for this purpose.

Product features
• RoHS & WEEE Directive Compliant
• Excellent adhesion to all clean copper surfaces
• A selection of products is available to suit a wide range of process conditions
• The required colour and finish may be obtained by mixing the resist with the appropriate hardener

XZ100 Series notation inks are screen printed two-pack thermal curing inks that give a well defined and highly resistant film when printed over a solder resist.
This Technical Information Leaflet (TIL) and the relevant Material Safety Data Sheet (MSDS) should be read carefully prior to using this product.
The use of XZ100 White in nickel/gold and chemical tin processes should be evaluated prior to production.

Product features
• RoHS & WEEE Directive Compliant
• XZ100 White and Yellow Inks conform to JPCA-ES01 Standard for halogen content (< 900ppm), and are therefore classed as “Halogen Free” products
• May be cured with a range of hardeners which are specially formulated to suit a range of press and process conditions

Imagecure XV501T-4 Screen is a two-component thermal hardening liquid photoimageable solder resist that dries by solvent evaporation to give a film that can be processed in aqueous potassium or sodium carbonate solution, or solvent.
This Technical Data Sheet (TDS) and the relevant Safety Data Sheet (SDS) should be read carefully prior to using this product.

Product features
• RoHS & WEEE Directive Compliant
• Excellent adhesion to all clean copper surfaces
• For coating over reflow tin/lead, all over gold or PTFE please discuss suitability with your Sun
Chemical representative
• A selection of products is available to suit a wide range of process conditions. The required colour
and finish may be obtained by mixing the appropriate resist with the clear hardener
• Certain products suitable for exposure with Laser Direct Imaging (LDI); please refer to Technical
Data Sheet (TDS) number T227 for further information

Imagecure XV501T screen is a two-component thermal hardening liquid photoimageable solder resist that dries by solvent evaporation to give a film that can be processed in aqueous potassium carbonate, sodium carbonate or Butyl diglycol (BDG).
This Technical Information Leaflet (TIL) and the relevant Material Safety Data Sheet (MSDS) should be read carefully prior to using this product.

Product features
• RoHS & WEEE Directive Compliant
• Excellent adhesion to all clean copper surfaces
• Suitable for use with reflow tin/lead and electrolytic gold plated conductors
• The required colour and finish may be obtained by mixing the appropriate coloured resist with the
clear hardener

Imagecure XV501T-4 Screen is a two-component thermal hardening liquid photoimageable solder resist that dries by solvent evaporation to give a film that can be processed in aqueous potassium or sodium carbonate solution, or solvent.
This Technical Information Leaflet (TIL) and the relevant Material Safety Data Sheet (MSDS) should be read carefully prior to using this product.

Product features
• RoHS & WEEE Directive Compliant
• Excellent adhesion to all clean copper surfaces
• Not recommended for use with reflow tin/lead and electrolytic gold plated conductors. For reflow tin/
lead and electrolytic gold plated conductors the Imagecure XV501T screen products are
recommended
• A selection of products is available to suit a wide range of process conditions. The required colour
and finish may be obtained by mixing the appropriate resist with the clear hardener
• Suitable for exposure with Laser Direct Imaging (LDI); please refer to Technical Information Leaflet
(TIL) number T227 for further information

EPR5000 Peelable Masks

Peelable Solder / Plating Resists are 100% solids, single component screen printable resists designed to give protection to specific areas of a circuit board during plating and soldering operations.
The resists are temporary coatings that can easily be removed by hand once the particular plating or
soldering process has been finished.
This Technical Information Leaflet (TIL) and the relevant Material Safety Data Sheet (MSDS) should be read carefully prior to using this product.

Product features
• RoHS & WEEE Directive Compliant
• Peel readily from the circuit board leaving no residues or stains in the plated through holes or on
the surface of the board
• If the resist is not removed as soon as possible, boards can be warmed prior to resist removal to
ease the peeling process
• The EPR5000 range are suitable for some chemical plating processes and all soldering
applications including higher temperature lead-free processes.

Imagecure IMC6000 series spray coat is a two-component thermal hardening liquid photoimageable solder resist that dries by solvent evaporation to give a film that can be processed in aqueous potassium or sodium carbonate solution, or solvent.
Imagecure IMC6000 series spray has been formulated for LED applications.
This Technical Information Leaflet (TIL) and the relevant Material Safety Data Sheet (MSDS) should be read carefully prior to using this product.

Product features
• RoHS & WEEE Directive Compliant
• Excellent adhesion to all clean copper surfaces
• It is recommended that IMC6000 series white LPISM is tested with intended ENIG chemistry and then checked after reflow soldering prior to final approval.

Imagecure IMC3000 Screen is a two-component thermal hardening liquid photoimageable solder resist that dries by solvent evaporation to give a film that can be processed in aqueous potassium or sodium carbonate solution, or Butyl diglycol (BDG).
This Technical Information Leaflet (TIL) and the relevant Material Safety Data Sheet (MSDS) should be read carefully prior to using this product.

Product features
• RoHS & WEEE Directive Compliant
• Excellent adhesion to all clean copper surfaces
• A selection of pack sizes is available to suit customer needs

Imagecure XV501T DI solder mask is a liquid product which dries by evaporation to give a film that can be sensitized by exposure to UV wavelengths between 360nm and 405nm. The unexposed material is developed in a dilute alkali solution and then cured to give a durable, chemical and heat-resistant film.
This Technical Data Sheet (TDS) and the relevant Material Safety Data Sheet (MSDS) should be read carefully prior to using this product.

Product features
• Available in semi-matt and matt finishes.
• Resolution capability down to 50μm (2mil.) and less.
• Exposure sensitivity 40 - 250mJ/cm² (depending on colour / DI Machine)
• Proven resistance to HASL processing.
• Compatible with a range of Ni/ Au and immersion tin chemistries.
• Excellent adhesion to and encapsulation of copper tracks.
• Halogen free (<300ppm total halogen content)
• RoHS & WEEE Directive Compliant

Imagecure XV501T DI solder mask is a liquid product which dries by evaporation to give a film that can be sensitized by exposure to UV wavelengths between 360nm and 405nm. The unexposed material is developed in a dilute alkali solution and then cured to give a durable, chemical and heat-resistant film.
This Technical Information Leaflet (TIL) and the relevant Material Safety Data Sheet (MSDS) should be read carefully prior to using this product.

Product features
• Available in semi-matt and matt finishes.
• Resolution capability down to 50μm (2mil.) and less.
• Exposure sensitivity 40 - 250mJ/cm² (depending on colour / DI Machine)
• Proven resistance to HASL processing.
• Compatible with a range of Ni/ Au and immersion tin chemistries.
• Excellent adhesion to and encapsulation of copper tracks.
• Halogen free (<300ppm total halogen content)
• RoHS & WEEE Directive Compliant

Toucan 6700 series inks are two-pack epoxy resin screen printing inks that have been specifically formulated to give excellent adhesion on a wide range of substrates, often when all else fails. Toucan 6700 series inks adhere to primed, enamelled and uncoated metal, glass, many plastics, printed circuit boards, laminates, wood and composite woods such as hardboard. Toucan 6700 series inks have exceptional resistance to physical wear and aggressive chemicals but are not recommended for prolonged outdoor use.

Two-pack solder resists are screen printed thermally curable products that give a highly resistant film on both tin/lead and copper PCB's.
This Technical Data Sheet (TDS) and the relevant Safety Data Sheet (SDS) should be read carefully prior to using this product.

Product features
• RoHS & WEEE Directive Compliant
• A selection of products is available to suit a wide range of process conditions
• The required colour and finish may be obtained by mixing the resist with the appropriate hardener

XZ100 Series notation inks are screen printed two-pack thermal curing inks that give a well defined and highly resistant film when printed over a solder resist.
This Technical Data Sheet (TDS) and the relevant Material Safety Data Sheet (MSDS) should be read carefully prior to using this product.
The use of XZ100 White in nickel/gold and chemical tin processes should be evaluated prior to production.

Plating is the most complex process associated with circuit production by screen printing. The formulation of a plating resist is critical; it must withstand long plating periods in either acid or alkaline baths and various pre-cleaning processes. Plating resists must not contaminate plating baths and afterwards must be readily removable in either organic solvents or aqueous solutions. They must also be capable of very fine print definition; i.e. capable of producing circuit patterns with tracks and gaps of between 200 - 250m. (8-10 mil.).